Hoi4 コマンド - HOI4 Commands List

コマンド Hoi4 各国戦略

コマンド Hoi4 observe(spectator) Console

コマンド Hoi4 【HoI4】コンソールコマンド(チート)使い方まとめ

コマンド Hoi4 【HoI4】コンソールコマンド向けのデータまとめ

コマンド Hoi4 HOI4 Commands

コマンド Hoi4 Commands

【HoI4】コンソールコマンド向けのデータまとめ

コマンド Hoi4 List of

コマンド Hoi4 データ集/チートコード

コマンド Hoi4 【HoI4】コンソールコマンド向けのデータまとめ

コマンド Hoi4 Console commands

データ集/チートコード

Console commands

Useful if you modify a file to change a setting and don't want to completely restart your game. Hover over a command in the table to view detailed argument-related help. Equipment The name of the equipment you wish to attack with. Country Tag The tag of the country you wish to remove the specified state as a core from. Must be fired from ROOT, the country that should be exiled, or a TAG specification must be used. Level The level of the building you wish to modify the health of. Start game, load savegame and save as new file, exit game. Executing this command will allow you to freely assign general traits to commanders, etc. To clarify, if this command is executed without any arguments 'fow' , it will turn off fog of war completely. The scoped country inherits the techs from the targeted TAG so be careful with the scope. Useless since unactivable in multiplayer and chat unactivable in singleplayer. Does not support Naval equipment. Name The name of the actor you wish to spawn. This command removes the specified state as a 'core' of the specified country. Map mode IDs: 1 Default , 2 Naval , 3 Air , 4 Supply , 5 State , 6 Resistance , 7 Resource , 8 Diplomacy , 9 Faction. Type the name of a command into the search bar to instantly search our database of 172 HOI4 commands for the most recent version of the game on Steam PC. All content on this website "the Site" is the property of HOI4 Commands. Also of note, commands may not work in ironman games by design. Executing this command will cause naval invasions to skip preparation time. The collection and assembly of content on this Site are the exclusive property of HOI4 Commands and are protected by copyright and other intellectual property laws. One of: 'fascism', 'democratic', 'neutrality' or 'communism'. You can remove equipment by specifying a negative amount. IgnorePrerequisites Ignores focus prerequisites Allows you to start a focus in the middle of the tree Decision. This command can be used to spawn a specified amount of a unit in a province. If not specified, the entire map will be toggled. The console will give a message confirming the command, but in my testing no flag is set. Nations spawned in civil wars are given a tag in the range D01, D02, D03 and onwards depending on availability note that D50 is the highest available tag. Make sure to save the file with ANSI encoding format. Useful in civil wars and when countries split. The debug info includes things like province ID, state ID, etc when you hover over a province on the map. Can declare war without justification This is likely the most effective way of wanting to start a war without needing to wait for the justification. Result The name of your desired result of the air combat scenario. About HOI4 Commands Copyright © 2020 HOI4Commands. The IDs are: 1 Default , 2 Naval , 3 Air , 4 Supply , 5 State , 6 Resistance , 7 Resource , 8 Diplomacy , 9 Faction. Speed Multiplier The number to multiply the speed of animations by. You can optionally specify either a mapname, postfx or filename ending in. The country the player becomes needs to be the scope in which the command is used. Country Tag The country tag of the first country you wish to be a part of the white peace treaty. Removes a nuke from stockpile when used. Tooltip debug mode shows information such as IDs for provinces, states, etc when you hover over them on the map. You can remove stability by specifying a negative number. We are an Amazon Associate and earn from qualifying purchases. NoChecks Ignores focus requirements Affects AI Focus. When using state it nukes a random province in said state, with a preference to enemy occupied provinces. If a province ID is specified as an argument, fow will only be toggled for that province. The command you wish to receive help information for. Hearts of Iron 4 Console Commands List Find below an updated list of all Hearts of Iron IV console commands, these are commonly referred to as cheat codes. Name ID Country Provinces State category Herat 415 2 15 1,634,853 2 rural 2 Kabul 267 6 18 4,642,801 2 town 4 1 2 3. Province ID The ID of the province you wish to spawn the actor within. Airbase State ID The state ID of the airbase you wish to attack from. If the country tag argument is provided, your country will occupy all land that the specified country owns but not land that they only occupy. Country Tag The country tag of the second country you wish to be a part of the white peace treaty. If a number is provided as an argument, the random count will be set to this. Click on the name of a command to visit its command page, on which you can find more help including examples. Ideology groups are: 'f' fascism , 'd' democratic , 'n' neutrality and 'c' communism. You can do this with the tdebug console command. This will print the data type for all dynamic reference objects to console. Note that certain effects may take a value from a variable, i. It will not work in later versions. Many codes can be turned off by repeating the command, but sometimes reloading the save or exiting the game is necessary. Common files: 'loc' localisation files , 'focus' focuses and 'landcombat. The number given should be between 1 and 50. Messages do not show, and the game is not automatically paused. Accepts all localization commands i. The number specified is a multiplier - 2 would double the speed, 0. The two files should be the same in size, etc , if not, there is likely a problem with saving. Building Type The type of building you wish to modify the health of. This is a community maintained wiki. Province ID The ID of the province you wish to initiate the air combat scenario within. If your keyboard layout doesn't have that key, other hotkeys to open the console are SHIFT + 2 and SHIFT + 3. Press the up or down arrow keys to traverse through previously executed commands. Useful if you want to leave the game running, but not for too long. File Name The name of the file you wish to reload: 'loc' localisation files , 'focus' focuses or 'landcombat. Ideology The ideology of the civil war. Note To make it work with new, generic created Admirals: 1. If used with country tag occupies all of their owned, not controlled, land, e. Amount The amount of autonomy levels you wish to add. While a state is selected other states cannot be changed. You can only add researched equipment. In debug mode, IDs for things like states, equipment, provinces, etc are shown when you hover over them which are very useful as they are used in console commands. This command is also known as the 'instant research' cheat. However, it also interferes with AI performance and is not a good indication of what the AI will do if observe mode is not used. Persists after execution until cleared via effect. Ideology Group The ideology group you wish to add popularity to. If you spot a mistake then you are welcome to fix it. A 'core' is a state that's considered to be a rightful part of a country. Please note that many of these commands come in and out with each DLC making some of them not work. See for information on the variable effects. AutoComplete fa Allows national focuses to be instantly finished Affects AI Focus. Is cleared once execution ends i. War Support values are between 0 and 1. Mods may introduce commands and more commonly, tags into the game to enhance their gameplay. Province ID The ID of the province you wish to spawn the unit within. State ID The ID of the state you wish to add as a core. Note that this command will affect the game's AI. Amount The amount of the specified unit you wish to spawn. Specify a negative number to remove war support. It is recommended you enable this as it is very helpful when using console commands. Ideology Group The ideology group you wish to set as the ruling party. Optional turn back on binarization in settings. Scenario The name of the scenario you wish to execute. The news event uses a different interface to the country event. Removes one trait and adds another. Effects are used throughout the game in numerous scopes, most commonly , and. This command adds the specified amount of naval utility to your naval utility count. This website is not affiliated with Hearts of Iron IV or Paradox Interactive. If you provide a country tag here, this will occupy all land that the specified country owns. Equipment Name The name of the equipment you wish to add. A spreadsheet with additional history and detail can be found here. Amount The amount of equipment you wish to add. State ID The ID of the state you wish to remove as a core. Effects also known as Commands are used in order to affect the game dynamically from within a specific scope. All copyrights reserved to their respective owners. Example: You create a variant of 'Matilda LP'-tank with better Armor and Main Gun and name it 'Matilda LP Mk. Ships are also constructed instantly. If executed with a command as an argument, it will print help for the specified command. If not specified, a list of commands will be printed. Mapmode ID The ID of the mapmode you wish to switch to. For more help using the console and cheat commands, see our. Must be used within a state scope. Amount The amount of health you wish to add or subtract from the building's health. The animation to spawn the actor with. To add modified equipment, you have to address it by given name. Country Tag The tag of the country you wish to add the specified state as a core to. Country Tag The tag of the country which you wish to add or subtract autonomy levels from. You can see the country tag by entering "tdebug" and hovering over a province of the country you want to know the tag of. Stability values are between 0 and 1. AutoComplete Allows national focuses to be instantly finished Affects AI Focus. Equipment Creator The country tag of the creator of the first specified equipment name. The participating countries are the owners of the specified states. Equipment Creator The country tag of the creator of the second specified equipment name. More information can be found in the page. Note that if you wish to change the ruling party of another country, you will first need to switch to them with the. The list of effects may be outdated. We do not assert any claim of copyright for Hearts of Iron IV. A multiplier of 2 would double the speed, a multiplier of 0. This is a list of all in Hearts of Iron IV. If an animation specified as an argument optional , the character will spawn with that animation. Possible ideologies: 'fascism', 'democratic', 'neutrality' and 'communism'. Country Tag The tag of the country you wish to start the civil war within. Those save files should look the same. Specify a negative number to reduce autonomy level. If specified, this will toggle fow in this province only.。

  • 。

  • 。

  • 。

Console commands

。

  • 。

  • 。

  • 。

observe(spectator) Console Command Help

。

  • 。

  • 。

  • 。

データ集/チートコード

。

  • 。

  • 。

  • 。

[B!] 【HoI4】コンソールコマンド(チート)使い方まとめ

。

  • 。

  • 。

  • 。

【Hearts of Iron IV 攻略ブログ】 軍隊の運用方法

。

  • 。

  • 。

  • 。

【HoI4】コンソールコマンド(チート)使い方まとめ

。

  • 。

  • 。

  • 。

    関連記事



2021 goboma.com