Door knobs require mounting screws on one side of the door to hold the inside and the outside halves together. Examine the door with your eyes. These antique furniture locks are authentic copies of vintage designs. To remove the rosette, all you have to do is gently pry with a flat screwdriver between the little slot and edge of the rosette as shown. Blank keys are available from a lot of places, including Van Dyke Restorers in Woonsocket, S. In this case, you would try a less drastic solution, such as lightly sanding the door, or else it may be drafty and shrunken come winter. File cabinets are not always made from the strongest materials, and it is not unusual for the drawer slides to malfunction, making it difficult to move the drawer or close it all the way.
Comes complete with one matching skeleton key. When you pry on the rosette it should pop off the base plate. The wax will help the drawer to glide smoothly once its back in place. I would love to know if there is anything in them and if possible, use them for storage once I get them open. Wait a day, and repeat these steps again. Then replace it with the spring from a salvaged lock or — better yet — with a piece of a modern bobby pin.
Comes complete with one brass-plated skeleton key. Many antique china cabinets used the old skeleton keys and are relatively easy to pick. Product, packageing, and shipping all done professionally. The first step is to remove one of the locks and take it in to an antiques store or a locksmith that has a collection of old bit keys, often called skeleton keys. Specializing in hardwood furniture, trim carpentry, cabinets, home improvement and architectural millwork, Wade Shaddy has worked in homebuilding since 1972.
If the door seems to be only slightly sticking, it is probably caused by changes in humidity. A half-mortise lock is exactly as it sounds — half exposed. All locks and latches are manufactured in high quality brass, with durable lock mechanisms designed to last. The top selvage is visible, but so is the back, or lockplate, of the lock on the inside of the drawer front. The culprit could be just a loose part of the lock assembly, a sharp burr or ridge on a new key, or a bend in an old one. Very happy with the weight and quality.
The second most common problem in the old locks, besides no key, is a broken spring. Some brands may not have a slot and will instead twist off the base plate. The lock works under no pressure. This could possibly cause whatever has jammed the drawer to move and might solve your problem. The key will not overextend it, that is caused by handling during installation. Turn counter-clockwise at the same time, gently but firmly and applying the same pressure as if you are unlocking the cabinet with a key. Locks are well made of steel and brass.
Usually you can just loosen the two screws as shown in the image and twist the base plate a bit to remove. If the detail is not clear, have your assistant hold the magnifying glass or loupe over the lock, so you better can see what you are doing. The rosettes are held in place with a little ridge on the inside of the rosette that keeps it snug on the base plate. Close the door and run your eyes along the gap between the door and the frame, noting places where the gap is very thin. The bolt shoots both directions for right or left handing.
Choose size according to backset measurement. Some brands have more of a circular button, some have a rectangular tab like this one shown. This non-mortise lock is an excellent choice for new furniture, or as a replacement for a worn or broken lock. Remove the cover of the lock case. Apparently the 19th century English had more of a need for security that we did. A spring holds the bolt notch fast to the face of the lock housing. Most of us who are interested in antique furniture have, at one time or another, run across what seemed liked an intractable problem at the time — the locks on an antique chest or desk.
I get nervous about buying things online and hope that they look good and these house numbers did not disappoint. There are cited in this article, which can be found at the bottom of the page. Having problems removing your old door knob to replace your knob or re-paint your door? Insert the miniature screwdriver gently into the ball area where the ball of the skeleton key would go. The levers must be aligned in a perfect line to allow the bolt to pass, but since their thickness is random and hidden, figuring out a cut pattern is very difficult. .